BS EN 12385-6-2004
|
ID： |
EEC55879188C4259B81C356601403121 |
|
文件大小(MB)： |
0.2 |
|
页数： |
28 |
|
文件格式： |
|
|
日期： |
2008-5-9 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,12385-6:2004,Steel wire ropes —,Safety —,Part 6: Stranded ropes for mine shafts,The European Standard EN 12385-6:2004 has the status of a,British Standard,ICS 77.140; 77.140.65, , ,,,,, , ,BS EN 12385-6:2004,This British Standard was,published under the authority,of the Standards Policy and,Strategy Committee,on 26 February 2004,. BSI 26 February 2004,ISBN 0 580 43485 0,National foreword,This British Standard is the official English language version,of EN 12385-6:2004. It supersedes BS 302-6:1987 which is withdrawn.,The UK participation in its preparation was entrusted to Technical Committee,MHE/2, Wire ropes, which has the responsibility to:,A list of organizations represented on this committee can be obtained on,request to its secretary.,Cross-references,The British Standards which implement international or European,publications referred to in this document may be found in the BSI Catalogue,under the section entitled “International Standards Correspondence Index”,or by using the “Search” facility of the BSI Electronic Catalogue or of,British Standards Online.,This publication does not purport to include all the necessary provisions of a,contract. Users are responsible for its correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,— aid enquirers to understand the text;,— present to the responsible international/European committee any,enquiries on the interpretation, or proposals for change, and keep the,UK interests informed;,— monitor related international and European developments and,promulgate them in the UK.,Summary of pages,This document comprises a front cover, an inside front cover, the EN title page,pages 2 to 24, an inside back cover and a back cover.,The BSI copyright notice displayed in this document indicates when the,document was last issued.,Amendments issued since publication,Amd. No. Date Comments,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 12385-6,February 2004,ICS 77.140; 77.140.65,English version,Steel wire ropes - Safety - Part 6: Stranded ropes for mine,shafts,Cables en acier - Sécurité - Partie 6: Cables d'extraction à,torons pour puits de mines,Drahtseile aus Stahldraht - Sicherheit - Teil 6: Litzenseile,für Schachtf鰎deranlagen des Bergbaus,This European Standard was approved by CEN on 3 November 2003.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Central Secretariat or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official,versions.,CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2004 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 12385-6:2004: E,Contents Page,Foreword .. 4,Introduction. 5,1 Scope. 6,2 Normative references 6,3 Terms and definitions 6,4 List of hazards.. 7,5 Safety requirements and/or measures . 7,5.1 General.. 7,5.2 Materials .. 7,5.2.1 Wire. 7,5.2.2 Core. 9,5.2.3 Lubricants and impregnating compounds. 9,5.3 Rope manufacture.. 9,5.3.1 Wire joints 9,5.3.2 Wire finish 9,5.3.3 Lubrication.10,5.3.4 Construction.10,5.3.5 Rope grade 10,5.3.6 Stitching of flat ropes10,5.3.7 Ropes for multi-rope friction hoists .10,5.4 Physical dimensions .10,5.4.1 Diameter..10,5.4.2 Tolerances .10,5.4.3 Permissible differences between diameter measurements.11,5.5 Breaking force .11,5.6 Rope length mass12,5.7 Designation and classification.12,6 Verification of the safety requirements and/or measures.12,6.1 General.12,6.2 Lubricants..12,6.3 Lubrication.12,6.4 Construction.12,6.5 Test on rope for breaking force ..13,6.5.1 Measured breaking force Fm (method 1).13,6.5.2 Measured aggregate breaking force, Fe.m (metho……
……